|
|
|
|
Bergey Wind Generator Tower Kits
| (Hint: A tower too short is like putting a solar system in the shade) | |||
Guyed-Lattice
Pro: Best Value Pro: Easy Install, with crane Con: Guy Wires Available Heights: 12-37m (40-120 ft) 1.5 & 10 kW Only Best for 10 kW
|
Tilt-up, Tube
Pro: Easy Install, without crane Con: Guy Wires Available Heights: 9-24m (28-80 ft) 1 & 1.5 kW Only Best for 1 kW
|
"SSV" Type
Pro: No Guy Wires Pro: Good Looks Con: Higher Costs Available Heights 18-37m (60-120 ft) 10 kW Only
|
Tilt-up, Lattice
Pro: Lowers in hurricane or typhoon Pro: Installs without crane Con: Higher Costs Available Heights: 18-30m (60-100 ft) 10 kW Only
|
|
 |
 |
|
| Standard Guyed Towers | Model No. | Price | |||
10 kW |
18m (60 ft) | Tower kits include Bergey galvanized 3m (10 ft) lattice type tower sections and associated hardware, guy anchors, guy wires and associated hardware, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods. Tower wiring is not included. | XLG18 | $5,400 | |
| 24m (80 ft) | XLG24 | $6,000 | |||
| 30m (100 ft) | XLG30 | $6,900 | |||
| 37m (120 ft) | XLG37 |
$8,100 | |||
| Tilt-up Guyed Towers | Model No. | Price | |||
1 kW |
9 m (30 ft) | Tower kits include galvanized 2 m (6.6 ft), 89 mm (3.5 in) diameter tubular tower sections and associated hardware, guy anchors, guy wires and associated hardware, and gin-pole. UPS shippable. Tower electrical wiring is not included. | 1TU9 | $690 | |
| 13 m (42 ft) | 1TU13 | $985 | |||
| 19 m (64 ft) | Tower kits include galvanized 3 m (10 ft), 114 mm (4.5 in) diameter tubular tower sections and associated hardware, guy anchors, guy wires and associated hardware, and gin-pole. Not UPS shippable, must ship via truck. Tower electrical wiring is not included. | 1TU19 | $1,090 | ||
| 25 m (84 ft) | 1TU25 | $1,310 | |||
| 32 m (104 ft) | 1TU32 | $1,640 | |||
| Tower Raising Kit | Tower Raising Kits include a non- freewheeling worm-gear winch, a special bracket system for attaching the winch to a guy anchor, a pull-up cable, and a pulley block. Also includes a drive attachment for cordless drills. | 1TRK | $310 | ||
10 kW |
18m (60 ft) | Tower kits include Bergey galvanized 3m (10 ft) lattice type tower sections and associated hardware, guy anchors, guy wires and associated hardware, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods. Tower wiring is not included. | XLGT18 | $7,700 | |
| 24m (80 ft) | XLGT24 | $8,700 | |||
| 30m (100 ft) | XLGT30 | $10,000 | |||
| Jackstand | Support stand for lowered tower | XLJS | $380 | ||
| Raising Kit | 5:1 pulley blocks and cable for raising tower | XLTRK |
$1,800 |
||
| Self-Supporting Lattice Towers (SSV) | Model No. | Price | |||
10 kW |
18m (60 ft) | Tower kits include Rohn SSV galvanized 6m (20 ft) lattice type tower sections and associated hardware, J-bolt anchors, furling cable and furling winch mounting hardware, special tower grounding hardware, and ground rods. Tower wiring is not included. | XLSS18 | $7,000 | |
| 24m (80 ft) | XLSS24 | $8,900 | |||
| 30m (100 ft) | XLSS30 | $11,600 | |||
| 37m (120 ft) | XLSS37 | $15,100 | |||
| Options | Model No. | Price | |||
1 kW |
Enhanced Tower Corrosion Protection, for marine sites | ECPT | Request | ||
| Special tower adapters, for non-standard towers | Special | Request | |||
10 kW
|
Enhanced Turbine Corrosion Protection, for marine sites | XLECPT | $190 | ||
| Special Anchoring Schemes | SAS | Request | |||
| Special tower adapters, for non-standard towers | Crate | Request | |||
| Tower Fabrication License, drawings, parts list, and one-time license for local fabrication, Standard Guyed Towers only, export orders only | TFL | Request | |||
| Export crating, for tower hardware kit (tower sections not normally crated) | Crate | Request | |||
| Tower Wiring Kits These kits included a disconnect switch, special tower wire, and a lightning surge arrestor. They make installation easier and more "professional". |
Model No. | Price | |||
10 kW |
18m (60 ft) | Tower Wiring Kits include a fused disconnect switch, lightning surge arrestor, armored tower cable and connectors. Kits for pumping systems are supplied with non-fused disconnect switches. Specify turbine voltage or model when ordering. | XTWK18 | $800 | |
| 24m (80 ft) | XTWK24 | $860 | |||
| 30m (100 ft) | XTRW30 | $930 | |||
| 37m (120 ft) | XTWK37 |
$990 | |||
| DC Power Centers The Power Center provides a convenient and safe method of connecting all of the various Direct Current sources (e.g., wind & solar), battery strings, and loads (e.g., inverters & DC distribution panels) together. On the BWC Excel-R the Power Center can be integrated with the OptiCharge controller. On the BWC XL.1 the Power Center comes standard.
|
Model No. | Price | |||
1 kW |
7 Circuit | PC7 | $600 | ||
10 kW |
5 Circuit | DC Power Centers contain separate Positive and Negative DC buses with 125-300A Class T fuses on each circuit. Connect wind turbine(s), PV array(s), battery strings, DC feeder(s), and inverter(s). No metering. | XPC5 | $590 | |
| 7 Circuit | XPC7 | $700 | |||
| 9 Circuit | XPC9 | $810 | |||
| Custom | For hybrid systems up to 150 kW | Request |
|||
