|
|
|
|
Trace Sine Wave Inverters
The SW Series |
Advanced
Sine Wave
|
|
The prices displayed at the bottom of the page are Trace MSRP. Trace requires us to only display the MSRP. Please call for discount pricing | |
| Applications Off Grid:
Widely used throughout the world as a primary source of AC electricity, the SW offers sine
wave,utility grade output power, high capacity battery charger, high surge current ability
(inrush current), and easy installation. Grid Tie: The SW converts energy from multiple renewable energy sources,such as solar, wind, and microhydro, into AC power, selling power you don't use back to the utility. Backup Power: When the utility fails, the SW Series instantly supplies AC power to critical loads.When utility power returns, it can automatically recharge your batteries in preparation for the next power interruption. Features
|
||
The SW Series |
SW Series II Specifications |
| SW4024 | SW4048 | SW5548 | |
| AC Input Voltage | 120 VAC | 120 VAC | 120 VAC |
| AC Input Voltage Range | |||
 All modes except sell mode |
80-149 VAC | 80-149 VAC | 80-149 VAC |
| Sell Mode |
106-132 VAC | 106-132 VAC | 106-132 VAC |
| AC Input Current* | 60 amps AC pass thru / 30 amps AC charging | 60 amps AC pass thru / 30 amps AC charging | 60 amps AC pass thru / 35 amps AC charging |
| Continuous Power (@ 25° C) | 4000 VA | 4000 VA | 5500 VA |
| Efficiency (peak) | 94% | 95% | 96% |
| Output Voltage (RMS) | 120 VAC | 120 VAC | 120 VAC |
| Output Voltage Regulation | +/- 5% | +/- 5% | +/- 5% |
| Frequency (Nominal +/- 0.04% Crystal Controlled) | 60 Hz | 60 Hz | 60 Hz |
| Continuous Output (@ 25° C) | 33 amps AC | 33 amps AC | 46 amps AC |
| Surge Capability | |||
| 5 Sec Rating (resistive) |
8000 watts | 8800 watts | 9500 watts |
| 1 mSec |
110 amps AC | 110 amps AC | 110 amps AC |
| 100 mSec |
78 amps AC |
78 amps AC | 78 amps AC |
| Automatic Transfer Relay | 60 amps | 60 amps | 60 amps |
| DC Input Voltage (Nominal) | 24 VDC | 48 VDC | 48 VDC |
| DC Input Voltage Range | 22-33 VDC | 44-66 VDC | 44-66 VDC |
| DC Current at Rated Power | 200 amps DC | 100 amps DC | 140 amps DC |
| Short Circuit Current | 800 amps DC | 400 amps DC | 400 amps DC |
| Idle Consumption (Typical at Full Voltage) | < 16 watts | < 16 watts | < 20 watts |
| Search Mode Consumption | < 1 watt | < 1 watt | < 1 watt |
| Low Battery Protection (Enabled) | Adjustable low batery cut out and cut in - variable time | Adjustable low batery cut out and cut in - variable time | Adjustable low batery cut out and cut in - variable time |
| Maximum Charge Rate (Adjustable) | 120 amps DC | 60 amps DC | 70 amps DC |
| Total Harmonic Distortion | < 5% | < 5% | < 5% |
| Mechanical Specifications | |||
| Specified Temperature Range | |||
| Specified (will meet specified tolerances) |
32° F to 77° F (0° C to 25° C) |
32° F to 77° F (0° C to 25° C) |
32° F to 77° F (0° C to 25° C) |
| Allowed (may not meet specified tolerances) |
-40° F to 140°
F (-40° C to 60° C) |
-40° F to 140°
F (-40° C to 60° C) |
-40° F to 140°
F (-40° C to 60° C) |
| Non-Operating | -67° F to 284°
F (-55° C to 140° C) |
-67° F to 284°
F (-55° C to 140° C) |
-67° F to 284°
F (-55° C to 140° C) |
| Enclosure Type | Indoor, ventilated, steel chassis with powdercoat finish | Indoor, ventilated, steel chassis with powdercoat finish | Indoor, ventilated, steel chassis with powdercoat finish |
| Unit Weight | 105 lb (48kg) | 105 lb (48kg) | 136 lb (63kg) |
| Shipping | 111 lb (50kg) | 111 lb (50kg) | 143 lb (65kg) |
| Inverter Dimensions | 15"H x
22.5"W x 9"D (38cm H x 57cm W x 23cm D) |
15"H x
22.5"W x 9"D (38cm H x 57cm W x 23cm D) |
15"H x
22.5"W x 9"D (38cm H x 57cm W x 23cm D) |
| Shipping Dimensions | 20"H x
27"W x 15"D (52cm H x 69cm W x 40cm D) |
20"H x
27"W x 15"D (52cm H x 69cm W x 40cm D) |
20"H x
27"W x 15"D (52cm H x 69cm W x 40cm D) |
| Mounting | Wall Mount | Wall Mount | Wall Mount |
| Altitude | |||
| Operating |
15,000' (4,572 m) | 15,000' (4,572 m) | 15,000' (4,572 m) |
| Non-Operating |
50,000' (15,240 m) | 50,000' (15,240 m) | 50,000' (15,240 m) |
| Features and Options | |||
| Forced Air Cooling | Standard variable speed brushless DC Fans | ||
| Three-stage charging | Standard three-stage (bulk, absorption, and float) | ||
| Control Panel | Standard built-in, two line, backlit, alphanumeric LCD with 8 LED status indicators | ||
| Auto Generator Control System | Standard automatic generator control system for two and three wire start generators | ||
| Auxiliary Relays | Standard three user adjustable voltage controlled signal relays for control of loads or charging sources | ||
| Battery Temperature Sensor | BTS - standard remote battery temperature sensor for increased battery performance | ||
| Remote Control | SWRC - optional remote control and status indicator | ||
| Stacking Interface | SWI - optional for series stacking of two identical SW units for 120/240 VAC output / SWI/PAR - optional for paralleling two identical SW units for twice the power output at 120 VAC/60 Hz | ||
| Conduit Box | SWCB - optional side mount conduit box for code-compliant DC wiring connections | ||
| Common Specifications | |||
| Waveform | Sinewave, 34 to 52 steps per cycle | ||
| Load Sensing (Inverter Mode) | Adjustable 0 to over 200 watts (48 watts default) | ||
* Required for full pass thru and full charging. Specifications subject to change without notice. |
|||
| Prices - North American Applications (units available for applications in Europe, Japan, Peru and the Philipines) | ||
| SW4024 | 4.0 kva - 24 vdc input, 120 vac 60 Hz output with 120 amp charger and 60 amp AC transfer relay | $3495.00 |
| SW4048 | 4.0 kva - 48 vdc input, 120 vac 60 Hz output with 60 amp charger and 60 amp AC transfer relay | $3495.00 |
| SW5548 | 5.5 kva - 48 vdc input, 120 vac 60 Hz output with 70 amp charger and 60 amp AC transfer relay | $3995.00 |
