DC/AC power inverter - power panels

Power Panel Systems

Balance your system.

The prices displayed at the bottom of the page are Trace MSRP. Trace requires us to display only the MSRP. Please call for discount pricing

Finally a Low Cost Alternative to Assembling Components in the Field
Power Panels are Trace's first packaged power system. They are less expensive than an on-site component installation and meet many power application needs. To install a Power Panel, simply connect them to the battery, PV and or AC loads, Power Panels include inverters and are assembled by Trace with components specified by the dealer or customer.

Included in all Power Panel Systems:

Powder-coated steel backplate prewired with all NEC / UL required AC & DC overcurrent protection and disconnects (only for indoor installation). Simply connect to the battery and AC loads and your system is operational.
Can be used with wind, solar, or hydro DC charging sources
60 amp AC system bypass that allows inverter servicing while keeping AC loads connected to the grid or generator
ETL listed components and enclosure
Negative/ground bonding block

Options

Optional nonmetallic battery enclosure which doubles as a shipping enclosure
Single or dual C40 Charge controllers for solar, wind, hydro DC charging sources
Flexible conduit for connection of the system to the battery enclosure
One or two Trace SW or DR inverters

SW Series Power Panels

Sine wave AC power inverter with high-efficiency, bidirectional operation
Up to 11 kW of continuous AC power
Up to 60 amps of AC input from a generator or utility grid
Three-stage, temperature-compensated battery charging
(up to 240A @ 24 VDC, and 150A @ 48 VDC)
Utility-interactive and generator-support operating modes
Able to regulate up to 4.8 kW of power from solar or other DC charging sources
Available outputs of 105, 120, 230 or 120/240 vac at 50 or 60 Hz.
Available for a 12, 24 or 48-volt DC system

DR Series Power Panels

Modified sine wave AC power inverter with high-efficiency operation and battery charging ability
Up to 7.2 kW of continuous AC power (120/240 vac systems)
30 amps of AC pass through power at 120 or 120/240 vac from a generator or utility grid to your loads, in addition to the charger draw
Three-stage, temperature-compensated battery charging - up to 240A @ 12 VDC or 140A @ 24 VDC
Able to regulate up to 2.4 kW of power from solar or other DC charging sources
Available outputs of 105, 120, 230 or 120/240 vac at 50 or 60 Hz
Available for 12 or 24-volt DC system

Power Panel Systems

Specifications

SW Series Power Panel Systems The SW Power Panel system comes ready for installation, pre-wired with the following: SW Series sinewave AC power inverter with high efficiency and bi-directional operation, includes: - 60 amp AC pass-thru power at 120 VAC (/S=Single System) or 120/240 VAC (/D=Dual System) - Adjustable three stage, temperature compensated battery charging 175 or 250 amp DC disconnect breaker* 60 amp AC disconnect/bypass breaker in box* AC and DC wiring in conduit (battery cables not included)* Powder coated steel back-plate (40" H x 43" W x 1" D) Battery Temperature Sensor* Inverter Conduit Box* Negative/Ground Bonding Block 500 amp/50 mV shunt (for remote metering) *These items are doubled on /D (Dual=two inverters) systems
Part No.	Inverter(s)	Power	DC Inpute	Min Cable**	VAC Output	Charger
PP-SW4024S	SW4024	4.0 KW	24 VDC	4/0 AWG	120 @ 60 hz	120 amps
PP-SW4024/D	SW4024 x 2	8.0 KW	24 VDC	4/0 AWG x 2	120/240 @ 60 hz	120 amps x 2
PP-SW3024E/S	SW3024E	3.3 KW	24 VDC	4/0 AWG	230 @ 50 hz	100 amps
PP-SW3048E/S	SW3048E	3.3 KW	48 VDC	2/0 AWG	230 @ 50 hz	50 amps
PP-SW4048/S	SW4048	4.0 KW	48 VDC	2/0 AWG	120 @ 60 hz	60 amps
PP-SW4048/D	SW4048 x 2	8.0 KW	48 VDC	2/0 AWG x 2	120/240 @ 60 hz	60 amps x 2
PP-SW4548E/S	SW4548E	4.5 KW	48 VDC	2/0 AWG	230 @ 50 hz	57 amps
PP-SW5548/S	SW5548	5.5 KW	48 VDC	4/0 AWG	120 @ 60 hz	70 amps
PP-SW5548/D	SW5548 x 2	11.0 KW	48 VDC	4/0 AWG x 2	120/240 @ 60 hz	70 amps x 2

DR Series Power Panel Systems The DR Power Panel system comes ready for installation, pre-wired with the following: DR Series modified sinewave AC power inverter with high efficiency operation, includes: - 30 amp AC pass-thru power at 120 VAC (/S=Single System) or 120/240 VAC (/D=Dual System) - Adjustable three stage, temperature compensated battery charging 175 or 250 amp DC disconnect breaker* 60 amp AC disconnect/bypass breaker in box* AC and DC wiring in conduit (battery cables not included)* Powder coated steel back-plate (40" H x 43" W x 1" D) Battery Temperature Sensor* Inverter Conduit Box* Negative/Ground Bonding Block 500 amp/50 mV shunt (for remote metering) *These items are doubled on /D (Dual=two inverters) systems
Part No.	Inverter(s)	Power	DC Input	Min Cable**	VAC Output	Charger
PP-DR1512/S	DR1512	1.5 KW	12 VDC	2/0 AWG	120 @ 60 hz	70 amps
PP-DR1512/D	DR1512 x 2	3.0 KW	12 VDC	2/0 AWG x 2	120/240 @ 60 hz	70 amps x 2
PP-DR1512E/S	DR1512E	1.5 KW	12 VDC	2/0 AWG	230 @ 50 hz	70 amps
PP-DR1524/S	DR1524	1.5 KW	24 VDC	2/0 AWG	120 @ 60 hz	35 amps
PP-DR1524/D	DR1524 x 2	3.0 KW	24 VDC	2/0 AWG x 2	120/240 @ 60 hz	35 amps x 2
PP-DR1524E/S	DR1524E	1.5 KW	24 VDC	2/0 AWG	230 @ 50 hz	35 amps
PP-DR2412/S	DR2412	2.4 KW	12 VDC	4/0 AWG	120 @ 60 hz	120 amps
PP-DR2412/D	DR2412 x 2	4.8 KW	12 VDC	4/0 AWG x 2	120/240 @ 60 hz	120 amps x 2
PP-DR2424/S	DR2424	2.4 KW	24 VDC	2/0 AWG	120 @ 60 hz	70 amps
PP-DR2424/D	DR2424 x 2	4.8 KW	24 VDC	2/0 AWG x 2	120/240 @ 60 hz	70 amps x 2
PP-DR2424E/S	DR2424E	2.4 KW	24 VDC	2/0 AWG	230 @ 50 hz	70 amps
PP-DR3624/S	DR3624	3.6 KW	24 VDC	4/0 AWG	120 @ 60 hz	70 amps
PP-DR3624/D	DR3624 x 2	7.2 KW	24 VDC	4/0 AWG x 2	120/240 @ 60 Hz	70 amps x 2

Power Panel Options Several options are available pre-installed with wiring, conduit and fittings onto the Power Panel. Note:** These options are only available when ordered on the same purchase order as the Power Panel
Part Nr.	Description
PPO-C40	C40 DC charge or load controller installed, includes pre-wired 60 amp DC breaker
PPO-DVM/C40	Digital meter with LCD display installed on the front of the C40
PPO-CD15	15 amp DC load breaker pre-wired and installed in the DC disonnect
PPO-CD20	20 amp DC load breaker pre-wired and installed in the DC disconnect
PPO-CD60	60 amp DC load breaker pre-wired and installed in the DC disconnect
PPO-BC5-2/0	5 foot 2/0 AWG battery cable pair with ring terminals (battery side only) and flexible conduit
PPO-BC10-2/0	10 foot 20 AWG battery cable pair with ring terminals (battery side only) and flexible conduit
PPO-BC5-4/0	5 foot 4/0 AWG battery cable pair with ring terminals (battery side only) and flexible conduit
PPO-BC10-4/0	10 foot 4/0 AWG battery cable pair with ring terminals (battery side only) and flexible conduit.
PPO-BC15-4/0	15 foot 4/0 AWG battery cable pair with ring terminals (battery side only) and flexible conduit
PPO-SB	Heavy duty plastic shipping container, excellent for making a battery box (ID: 24"H X 46"L X 42"W)
Dual Power Panel systems (/D) require two battery cable pair. Total battery cable length that is usable is 1 foot less than the length ordered due to 1 foot required in the DC disconnect (i.e. PPO-BC5-2/0 is 5 feet long one-way, but 4 feet usable to the battery bank).
**Battery cables are offered only as an option and are not pre-installed on the Power Panel.

MSRP Pricing (call for discount pricing)
SW Series Power Panels A complete, pre-assembled electrical system which is factory built and NEC compliant. Power Panels are ETL listed to UL and CSA standards for stand-alone, utility-interactive and backup power applications Sine Wave (SW Series) Power Panels include: SW Series Inverter/Charger(s), with built-in automatic transfer relay(s) 175 or 250 amp DC disconnect breaker(s) with enclosures 60 amp AC input/output/bypass breaker(s) with enclosures 500 amp/50 mV shunt for optional TM500 meter AC and DC completely prewired in conduit (except battery cables) Mounted on powder coated steel back-plate 40"L x 43"W x 10"H (100 cm L x 107.5 cm W x 25 cm H) Shipping size: Plywood Crate 47"L x 44"W x 19"H (117.5 cm L x 110 cm W x 47.5 cm H) Shipping weight: 256 to 456 lbs (116 kg to 207 kg) Depending on Model
PP-SW4024/S	4.0 kVA - 24 VDC input, 120 VAC 60 Hz output, single SW4024 inverter, 120 amp charger, internal 60 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$4995.00
PP-SW4024/D	8.0 kVA - 24 VDC input, 120/240 VAC 60 Hz output, dual SW4024 inverters, 120 amp X 2 chargers, internal 60 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers	$8995.00
PP-SW4048/S	4.0 kVA - 48 VDC input, 120 VAC 60 Hz output, single SW4048 inverter, 60 amp charger, internal 60 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$5059.00
PP-SW4048/D	8.0 kVA - 48 VDC input, 120/240 VAC 60 Hz output, dual SW4048 inverters, 60 amp X 2 chargers, internal 60 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers	$9137.00
PP-SW5548/S	5.5 kVA - 48 VDC input, 120 VAC 60 Hz output, single SW5548 inverter, 75 amp charger, internal 60 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$5695.00
PP-SW5548/D	11.0 kVA - 48 VDC input, 120/240 VAC 60 Hz output, dual SW5548 inverters, 75 amp X 2 chargers, internal 60 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers	$9995.00
ABOVE FOR USE WITH NORTH AMERICAN APPLICATIONS ONLY
PP-SW3024E/S	3.3 kVA - 24 VDC input, 230 VAC 50 Hz output, single SW3024E inverter, 100 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$5049.00
PP-SW3048E/S	3.3 kVA - 48 VDC input, 230 VAC 50 Hz output, single SW3048E inverter, 50 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$5049.00
PP-SW4548E/S	4.5 kVA - 48 VDC input, 230 VAC 50 Hz output, single SW4548E inverter, 60 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$5695.00
ABOVE FOR USE WITH EUROPEAN APPLICATIONS ONLY
NOTE: Some E version Power Panels are available with dual inverters configured for twice the output at 230 VAC 50 Hz. Call your Trace reseller for more details on these models.
DR Series Power Panels A complete, pre-assembled electrical system which is factory built and NEC compliant. Power Panels are ETL listed to UL and CSA standards for stand-alone and backup power applications. DR Series Power Panel include: DR Series Inverter/Charger(s), with built-in automatic transfer relay(s) 175 or 250 amp DC disconnect breaker(s) with enclosures 60 amp AC disconnect/bypass breaker(s) with enclosures 500 amp/50 mV shunt for optional TM500 meter AC and DC completely prewired in conduit (except battery cables) Mounted on powder coated steel back-plate 40"L x 43"W x 8.25"H (100 cm L x 107.5 cm W x 20.6 cm H) Shipping size: Plywood Crate 47"L x 44"W x 19"H (117.5 cm L x 110 cm W x 47.5 cm H) Shipping weight: 199 to 266 lbs (91 to 121 kg) Depending on Model
PP-DR1512/S	1.5 kVA - 12 VDC input, 120 VAC 60 Hz output, single DR1512 inverter, 70 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$1979.00
PP-DR1512/D	3.0 kVA - 12 VDC input, 120/240 VAC 60 Hz output, dual DR1512 inverters, 70 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 input/output/bypass breakers	$3637.00
PP-DR1524/S	1.5 kVA - 12 VDC input, 120 VAC 60 Hz output, single DR1524 inverter, 35 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$1879.00
PP-DR1524/D	3.0 kVA - 12 VDC input, 120/240 VAC 60 Hz output, dual DR1524 inverters, 35 amp X 2 chargers, internal 30 amp automatic transfer relays, external 60 amp X 2 AC input/output/bypass breakers	$3529.00
PP-DR2412/S	2.5 kVA - 12 VDC input, 120 VAC 60 Hz output, single DR2412 inverter, 120 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$2295.00
PP-DR2412/D	5.0 kVA - 12 VDC input, 120/240 VAC 60 Hz output, dual DR2412 inverters, 120 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 input/output/bypass breakers	$4337.00
PP-DR2424/S	2.4 kVA - 24 VDC input, 120 VAC 60 Hz output, single DR2424 inverter, 70 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$2295.00
PP-DR2424/D	4.8 kVA - 24 VDC input, 120/240 VAC 60 Hz output, dual DR2424 inverters, 70 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers	$4337.00
PP-DR3624/S	3.6 kVA - 24 VDC input, 120 VAC 60 Hz output, single DR3624 inverter, 70 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$2529.00
PP-DR3624/D	7.2 kVA - 24 VDC input, 120/240 VAC 60 Hz output, dual DR3624 inverters, 70 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 input/output/bypass breakers	$4795.00
ABOVE FOR USE WITH NORTH AMERICAN APPLICATIONS ONLY
PP-DR1512E/S	1.5 kVA - 12 VDC input, 230 VAC 50 Hz output, single DR1512E inverter, 70 amp charger, internal 15 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$1979.00
PP-DR1524E/S	1.5 kVA - 24 VDC input, 230 VAC 50 Hz output, single DR1524E inverter, 35 amp charger, internal 15 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$1879.00
PP-DR2424E/S	2.4 kVA - 24 VDC input, 230 VAC 50 Hz output, single DR2424E inverter, 70 amp charger, internal 15 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker	$2295.00
ABOVE FOR USE WITH EUROPEAN APPLICATIONS ONLY
Power Panel Options (PPO) The following items are NOT included standard with Power Panels, they must be ordered in addition to the Power Panel. All options may be installed on SW or DR series Power Panels
PPO-C40	C40 DC charge or load or diversion controller, installed complete with prewired 60 amp DC breaker	$258.00
PPO-DVM/C40	Accumulating amp hour meter with LCD display, installed on the front of the C40 (monitors power flowing through C40)	$99.00
PPO-CD15	15 amp DC load breaker, pre-wired and installed in the DC disonnect	$59.00
PPO-CD20	20 amp DC load breaker, pre-wired and installed in the DC disconnect	$59.00
PPO-CD60	60 amp DC load breaker, pre-wired and installed in the DC disconnect	$59.00
PPO-BC5-2/0	5 foot (1.5m) 2/0 AWG battery cable pair with ring terminals (battery side only) and 2 foot (.6m) flexible conduit*	$83.00
PPO-BC10-2/0	10 foot (3m) 20 AWG battery cable pair with ring terminals (battery side only) and 7 foot (2.2m) flexible conduit*	$132.00
PPO-BC5-4/0	5 foot (1.5m) 4/0 AWG battery cable pair with ring terminals (battery side only) and 2 foot (.6m) flexible conduit*	$115.00
PPO-BC10-4/0	10 foot (3m) 4/0 AWG battery cable pair with ring terminals (battery side only) and 7 foot (2.2m) flexible conduit*	$182.00
PPO-BC15-4/0	15 foot (4.5m) 4/0 AWG battery cable pair with ring terminals (battery side only) and 12 foot (3.7m) flexible conduit*	$200.00
PPO-SB	Heavy duty plastic shipping container, excellent for making a battery box	$359.00
NOTE: * Flexible conduit is shorter than battery cables to allow for extra cable length inside the battery enclosure and the disconnect switch. All Power Panels are prewired for the installation of the TM500 system monitor. 48 VDC models require the TM48 adaptor.