|
|
|
|
Trace Power Module Systems
Power Module Systems |
| All pricing is MSRP, call for discount pricing |
| The TRACE Power
Module System is a "balance of system"
package designed to permit seamless system integration. Aimed at meeting a broad range of
applications, the modular design facilitates installation standardization while permitting
maximum flexibility. It allows isolation of components, wiring and safety circuitry in a
lockable cabinet while maintaining access to all the breakers. Included in all Power Module Systems |
|
| The PM system
cabinets can be connected together in stacks of up to four high. Each stack can be used to
house just the electronics (inverters, controllers, and AC/DC breakers), a combination of
electronics and sealed batteries, or to house just batteries as an adjacent stand-alone
cabinet connected to an electronic power module. Many features combine to make the PM system ideal for distributors and dealers. The basic PM configuration is supplied complete with AC/DC breakers, wiring and mounting screws for field installation. Modules are easily stocked since they are not specific to 12-, 24-, or 48- VDC systems. C40 charge/load controllers, inverters and batteries are supplied separately allowing distributors and dealers to pull from existing stock. A variety of optional kits are available and can be field installed. Modular design allows field upgrades and expansion of the system as needed. Individual modules are standardly shipped via UPS and are easily moved and assembled by one or two people. The inverter and batteries are shipped separately. Special packing is required when shipping a fully assembled module (inverters included) by truck freight, consult Trace for additional cost. |
|
Power Module Systems |
Configurations for SW and DR Inverters |
Basic combinations of Power Modules for inverters and
AC/DC disconnects, includes complete cabinet with top and doors, and all mounting
hardware. Breaker layouts and cabinet dimensions can be found on the Power
Module Option DC and AC Breakers/Disconnects page and the dimensions
page. All single inverters and the dual DR inverters fit in one module, dual SW inverters
fit in two modules. Includes all wiring between breakers and inverter, DC battery
disconnect, AC input/output/bypass breakers, DC shunt and bonding block, and AC neutral
and grounding blocks. Add C40 Charge
Controllers and battery modules to complete the system.
| Part Number | Type of Inverters (ordered as separate line item) | Nr. of Inverters | Maximum Nr. optional C40 Charge Controllers and/or DC input/output Breakers | Maximum Nr. optional AC Breakers (in addition to input/output/bypass) | Price |
| PM-SW250/S | SW4024 or SW5548 | 1 | 3 | 4 | $1120.00 |
| PM-SW250/D | SW4024 or SW5548 | 2 | 7 | 8 | $1845.00 |
| PM-SW175/S | SW4048 | 1 | 3 | 4 | $1120.00 |
| PM-SW175/D | SW4048 | 2 | 7 | 8 | $1845.00 |
| PM-DR250/S | DR2412 or DR3624 | 1 | 3 | 4 | $1120.00 |
| PM-DR250/D | DR2412 or DR3624 | 2 | 2 | 1 | $1545.00 |
| PM-DR175/S | DR1512, DR1524 or DR2424 | 1 | 3 | 4 | $1120.00 |
| PM-DR175/D | DR1512, DR1524, or DR2424 | 1 | 2 | 1 | $1545.00 |
Power Modules for batteries or other equipment. Sealed batteries may be added to the Power Module Configurations shown above, up to a total of four modules high in a stack. Vented batteries must be contained in separate battery stacks. See below for details.
| Part Number | Description | Price |
| PM | Base Power Module without electrical components for a stand-alone vented battery cabinet or other equipment. Will hold four group 27/31, or six golf cart type batteries. Includes doors and top, add PM-ADD or PM-EXT for additional battery capacity | $495.00 |
| PM-ADD | Add to Power Module Configurations shown above for sealed batteries, or to the base Power Module for additional battery capacity. Will hold four group 27/31, or six golf cart type batteries | $395.00 |
| PM-EXT | Add to the base Power Module to be used with taller batteries. Module does not have a bottom and cannot have any additional modules stacked on top of it or be used under any electronics. Adds an additional 19 inches clearance for two volt cells or L-16 type batteries. | $295.00 |
Requires PM and PM-EXT |
Requires PM and/or PM-Add |
||
 |
 |
 |
 |
| Twelve each - 2 Volt Batteries | Four each - L-16 Type 6 volt Batteries | Four each - GRP27/31's 12 Volt Batteries | Six each- Golf Cart Type 6 or 8 Volt Batteries. |
Power Module Systems |
Optional DC and AC Breakers/Disconnects |
Used to add inputs/loads to the basic configurations. Follow the Power Module configuration table and the disconnect/breakers combinations diagrams below to insure adequate mounting slots.
| Part Number | Description | Price |
| PMO-DC250 | Additional 250 amp DC Heineman™ breaker and 4/0 AWG cabling to allow addition of a second DR series inverter into a single Power Module. Does not include battery cables. | $320.00 |
| PMO-DC175 | Same as PMO-DC250 amp DC Heineman™ and 2/0 AWG cabling. Does not include battery cables. | $320.00 |
| PM-DC20 | 20 amp DC Heineman™ CD breaker for DC inputs or loads with #6 AWG wire and ring terminals. | $25.00 |
| PM-DC60 | 60 amp DC Heineman™ CD breaker for DC inputs or loads with #6 AWG wire and ring terminals. | $40.00 |
| PMO-DC110 | 110 amp DC Heineman™ CD breaker for DC inputs or loads with #2 AWG wire and ring terminals. | $65.00 |
| PM-IOX60 | 60 amp AC input/output/bypass breaker assembly to allow addition of a second DR series inverter, or a second AC input to a SW or DR inverter. Includes #6 AWG wire. | $145.00 |
| PMO-AC15 | 15 amp AC Square-D™ QOU breaker with #6 AWG wire for AC input or loads. | $20.00 |
| PMO-AC20 | 20 amp AC Square-D™ QOU breaker with #6 AWG wire for AC input or loads. | $20.00 |
| PMO-AC60 | 60 amp AC Square-D™ QOU breaker with #6 AWG wire for AC input or loads. | $40.00 |
| PMO-DCBB/KIT/ | DC negative bonding block with 500 amp/50mv shunt and bus bar. Designates /SW or/DR depending on series of inverter being used. | $115.00 |
| PMO-PDBB | Power distribution block has 1 each 2/0 AWG input and 4 each 4 to 4 AWG output screw terminals. Modular design allows multiple blocks to be connected when more terminals are needed. | $20.00 |
| DC Breaker Combinations | |||
| Three (175 or 250 amp) Heineman™ GJ series breakers | Two GJ and two (20-110) Heineman™ CD series breakers | One GJ and three Heineman™ CD series breakers. | Five Heineman™ CD series breakers. |
 |
 |
 |
 |
| AC Breaker Combinations | ||
| Seven (20, 60, or 70 amp) Square-D™ QUO breakers. | One (20 or 60 amp) single phase bypass and four (20 or 60 amp) Square-D™ QOU breakers. | Two (20 or 60 amp) single phase bypass and one (20 or 60 amp) Square-D™ QOU breakers. |
 |
 |
 |
