Statpower Prosine DC/AC power inverter

True Sine Wave Power Inverter
120 volt version - 1000 watt continuous, 1500 watt surge

The PROsine 1000 true sine wave power inverter sets a new benchmark for performance and value in the inverter catagory. Based on a 'clean-sheet' design approach, the inverter breaks new ground in form and function, and distances itself from competitive products in the performance arena.

Utilizing advanced high-frequency switching technology in the power conversion process, the PROsine 1000 incorporates some of the most advanced circuitry and components available today. Compact, light weight and bristling with a host of features, the PROsine 1000 offers a seemless, transparent delivery of AC power.

Most significantly, PROsine's true sine wave output allows connected loads and equipment to operate the same as they would from utility supplied power. In both features and performance, the PROsine 1000 admirably takes a significant step forward.

Features of the PROsine 1000 Inverter:

1. TRUE SINE WAVE output

The PROsine 1000 power inverter draws power from a battery and delivers a true sine wave AC output that is the same as the waveform supplied by your local electric utility. In some cases, the PROsine 1000 can deliver an even better waveform than your utility-supplied power due to the extensive control circuitry incorporated in the design of the unit.

2. STATUS MONITORING AND CONTROL where you want it

With the purchase of the PROsine Interface Panel, the detachable LCD panel provides the user a range of mounting options and delivers important system monitoring information in the most convenient location.

3. The LCD PANEL provides:

DC input voltage from the battery
DC input current (Amps) drawn from the battery
Power scale with inverter wattage output
Status/Error display for shutdown conditions - overload, over-temperature, over/under voltage
Convenience - can be mounted in 4 different ways on the inverter or remotely mounted with the purchase of the optional PROsine Interface Panel.

4. AUTOMATIC TRANSFER SWITCH OPTION

An integral transfer relay has two functions. When utility AC power fails or is disconnected from the unit, a quick transfer takes place and the PROsine 1000 inverter begins inverting DC battery power, and delivering AC power to the loads. When utility AC becomes present again, the transfer relay switches back and utility AC power is fed through to the loads. With this option, the PROsine 1000 can be used as a standby backup power system.

An optional PROsine Interface Panel is available for both the PROsine 1000 and 1800. This panel occupies the cavity left on the inverter when the LCD panel is removed and mounted remotely from the inverter. Call Xantrex for more information on this option.

PROsine 1000 Product Features:

True sine wave output (<3%THD)

A smooth, step-free waveform delivering dependable and reliable electrical power for even the most demanding and sensitive of loads.

Detachable LCD display panel

Providing remote status monitoring of the battery, and functional control of the unit.

Built to last

With leading edge design, microcomputer control, and stringent regulatory approvals, the PROsine is built to work hard and long, day-in and day-out.

Easy to handle and install

High frequency switching technology allows for smaller internal components, and creates big savings in PROsine's overall size and weight. A slimmer profile and lighter weight – a remarkable 14.5 lbs. / 6.5 kg – make the PROsine more convenient for installation in tight spaces where competitive products just won't fit.

Connect from any angle...UP, DOWN, BACKWARDS, and ANYWHERE in between:

PROsine's DC connection terminals have been uniquely designed to accept battery cables in 180 degrees of rotation. Our design approach makes it easier to wire up the PROsine even in the most constrained areas, and lets the wires exit from the power inverter in the most convenient fashion.

Additional Features and Options:

PROsine 1000 Protection Features:

Over-temperature shutdown

Auto overload protection

Battery reverse polarity (fuse)

Short-circuit protection

AC backfeed

Over-voltage protection

Under-voltage protection

Available Options:

PROsine Interface Panel

DC hardwire kit

Configuration Options:

AC hardwire terminal

AC hardwire terminal with transfer relay

PROsine 1000

Max. Continuous Power	1000W
Surge Capability (5 seconds)	1500W
Peak Output Currency	25A
Peak Efficiency	89%
No Load Current Draw	<1.5W (search mode)
Output Frequency	60Hz +/-0.05% (crystal controlled)
Output Waveform	True sine wave <3% THD
Input Voltage Range 12V / 24V	10 - 16Vdc / 20 - 32 Vdc
Output Voltage (at no load)	120Vac RMS +/- 3%
Output Voltage (over full load & battery voltage range)	120Vac RMS -10% /+4%
Low Battery Cut-Out 12V / 24V	10Vdc / 20Vdc (5 sec. time delay, 10.5Vdc warning)
High Battery Cut-Out 12V / 24V	16Vdc / 32Vdc
Protection	Automatic overload, short circuit, overtemperature, over voltage, under voltage, reverse polarity (fuse), AC backfeed
Transfer Relay Rating	15A (on hardwire/transfer relay models)
Transfer Time AC to Inverter and Inverter to AC	Max 2 cycles (typically 1 cycle) <2.5 seconds with POWERSAVE "ON"
Regulatory Approvals and Other Designations	CSA 107.1, UL 458 and UL 1741
Designed to meet	KKK-A-1822D Fed. Spec. for Ambulance; ABYC E8, E9, A25
EMC	FCC Class A
Weight	14.5 lbs. (7 kg)
Length	15.4 in. (390 mm)
Width	11 in. (280 mm)
Height	4.5 in. (115 mm)
Operating Temperature (See power derating curves)	0� - 60� C (32� - 140� F)
Storage Temperature	-30� to +70� C (-22� to +158� F)